EPS graphic prints with a box around it on HP LaserJet IV due to header.
Cause:
The TIFF header is being printed instead of the EPS code.
Solution:
Update the print driver and/or use Raster Graphics instead.
Do one of the following in Word 7.0:
1) Change the print properties to use Raster Graphics.
a) Select the 'File' menu and select 'Print'.
b) Click 'Properties...'.
c) Choose 'Use Raster Graphics' at the bottom of the dialog box.
d) Click 'Apply'.
e) Click 'OK'.
2) Obtain and install an updated version of the printer driver.
a) Click the 'Start' button to display the Windows 'Start' menu.
Start menu
b) Select 'Settings' and select 'Printers'.
Printers from Settings menu
c) Open 'Add Printer'. (The Add Printer Wizard is launched.)
Add Printer
d) Click 'Next'.
e) Do one of the following to select the printer location:
1] Select 'Local Printer' if the printer is attached directly to the computer.
2] Select 'Network Printer' if the printer is attached to another computer.
a] Click 'Next'.
b] Type the network path. (The path must include the network drive letter.)
typing network printer settings
c] Select whether or not to print from MS-DOS-based programs.
d] Choose 'Next'.
f) Choose 'Next'.
g) Do one of the following:
1] Select from available printers:
a] Select a manufacturer in the 'Manufacture' list.
b] Select a printer model in the 'Printer' list.
2] Use the manufacturer's disk:
a] Click 'Have Disk...'.
Have Disk
b] Type the path to the disk.
c] Click 'OK'.
d] Select a printer from the list.
h) Choose 'Next.'
i) Select the printer port.
select printer port
j) (Optional) Type a name for the printer.
k) Select 'Yes' or 'No' the make this printer the default printer for Windows.
Default printer
l) Choose 'Next'.
m) Select 'Yes' or 'No' to print a test page.
n) Choose 'Finish'.
